Archive

Author Archive

Vehicle Truck, Bus, Coach Winter Battery Test

April 26th, 2018 Comments off

Truck Bus, Coach Winter Battery Test
Cold Weather Means Vehicle Battery Tests More Beneficial
Cold weather is especially hard on Car, Van, Truck, Bus & Coach batteries.

According to AAA’s Automotive Research Center, at 0°F, a car’s battery loses about 60 percent of its strength, during cold temperatures starting an engine can take up to twice as much current as needed under normal conditions.

Cold weather inhibits the chemical reaction necessary to make a battery work, which is often the reason you may have trouble starting a vehicle on a cold winter morning! Cold weather together with a lack of vehicle usage, especially over the festive period, every year leads to high numbers of assistance call outs.

During the cold winter months, the last thing is a breakdown due to vehicle battery problems. A vehicle battery’s ability to charge is also reduced in the cold weather.

Charge and test is the recommendation for all garages while service or MOT-ing vehicles this winter.

Charging batteries will replace the lost capacity that modern day gadgets use, a vehicles recharging circuit will only replace the lost capacity through driving. Sat navs, mobiles phones and DVDs for example could slowly discharge a battery and cause a flat battery breakdown.

aide automotive have been marketing the Midtronics Battery Tester for over 10 years, with some great customer response over this period the Midtronics range offer ease of use and accurate diagnose compared to other cheaper models.

aide automotive have a range of new and used Midtronics Testers, with some used testers in perfect condition offering a good saving from a new tester.

To equip a workshop with a excellent tester before the winter hits and keep vehicles on the road contact use by clicking on Midtronics Battery Tester and ask for pricing and specification of 12 volt Battery Testers or 24 Volt System Testers.

 

CV Winter Battery Tester

Midtronics MDX 655P 24 Volt Truck/Bus/Coach Battery Tester

Bus & Coach DASH Cameras

March 29th, 2018 Comments off

Salmonds DASH Cam Repeat Business Totals 15 Cameras

Salmond’s provides Coach Hire for all occasions, located in central Scotland and primarily provide coach hire in West Lothian, Edinburgh and Glasgow as well as the rest of the UK.

With a modern and flexible fleet of coaches. Salmonds also have many wheelchair accessible vehicles, with the whole fleet maintained to the highest standards.

With over 15 DASH Cams purchased from aide automotive, Salmond Coaches believe a Dash Cam is a valuable aide to a vehicles security and efficiency.
T90 – 1CH DASH CAMERA – unmatched video quality, the T90 Dash Camera with 1CH Built-in GPS & uses the very latest Sony Sensor technology. This little camera packs a punch with the Sony IMX 322 Sensor intergrated Smart Power Control for parking mode, so even easier installation, which is sure to worry other well know brands of dash cameras out there.

The T90 dash camera offers the following features:

  • Wifi enabled, for connecting to your smart phone – Apple & Android
  • Unit comes with a 16 gig sd card, but can take up to a massive 512 GB!
  • Full HD – 1920 x 1080p (30fps)
  • Sony IMX 322 Sensor
  • Built In Low Voltage Cut Off Function
  • Built In Dual Band GPS ( GPS + Glonass)
  • 21 Language support
  • Multi booting System – ACC-On-Off
  • AE (Auto Exposure)
  • Dual OS – Android&IOS – PC Viewer: Windows & Mac
Commercial Vehicle Incident Camera

Coach Company Salmonds DASH Cam Repeat Business Totals 15 Cameras

Electric & Hybrid Car Safety Tools

March 23rd, 2018 Comments off

aide’s Hybrid & Electric Car Tool Kits Wins Nationwide Order

With the emergence of Hybrid & Electric vehicles on UK roads, the need to service & maintain via franchise and after market garages is now upon us.

With the growth in environmental awareness, the use of electric and hybrid vehicles (E&HVs) is increasing. The recovery, repair, and maintenance of these vehicles outside the manufacturers and franchised dealership networks is increasing.

People in the motor vehicle repair and recovery industry are now more likely to come across E&HVs and as a result need to be aware of the additional hazards they may be exposed to when working with these vehicles. They may also need to develop a wider range of skills and knowledge and have access to specialist tools and equipment in order to be able to work safely.
Voltages present in E&HVs are significantly higher (currently up to 650 Volts direct current (dc)) than those used in other vehicles (12/24 Volts dc). In dry conditions, accidental contact with parts that are live at voltages above 110 Volts dc can be fatal. For E&HVs dc voltages between 60 and 1500 Volts are referred to as ‘high voltage’. This terminology is used in this guidance although high voltage is defined differently in other industry sectors.
Battery systems may contain chemicals that can be harmful if released. They also store significant amounts of energy that can give rise to explosion if not dealt with correctly.
There are substantial differences in the designs of E&HVs from different manufacturers. Having information specific to the manufacturer and the vehicle being worked on is important in identifying what actions are necessary to work safely.
With this aide automotive have introduced a stater Hybrid / Electric Car Safe to Service Tool Kit to help garages acquire the correct SAFE tools.
A nationwide garage service network has introduced a service plan for Hybrid / Electric Cars and hence purchased 320 Hybrid / Electric Car Safety Tool Kits.
Additional skills and training will be necessary to allow people to work safely with E&HVs,
Contact aide automotive to enquire about the Hybrid / Electric Car Safety Tool Kits today!
Electric & Hybrid Car Safety Tools

aide’s Hybrid & Electric Car Tool Kits Wins Nationwide Order

Portable Brake Tester Designed Specifically For Forklift Trucks

March 9th, 2018 Comments off

Forklift Trucks Brake Testing With BrakeCheck FLT

The BrakeCheck 4 Forklift Trucks (FLT) is our portable brake tester designed specifically for forklift trucks.
The Bowmonk BrakeCheck FLT is a fully self-contained, user-friendly, portable brake tester, which has been developed with a leading forklift truck manufacturer to take account of the slow speed and tilt of forklift truck vehicles. The instrument records the braking efficiency and percentage of braking imbalance in a matter of minutes.
The Bowmonk BrakeCheck FLT determines braking efficiency of both the Service Brake (Foot Brake) and Hand Brake by measuring the rate of deceleration from normal operating speed until the vehicle comes to rest.
The BrakeCheck FLT is the perfect tool to assist with LOLER/PUWER safety inspections.
Designed to be self-compensating, this Fork Lift Truck Brake Meter will indicate on the LED screen when it is positioned level enough to perform a brake test, with a generous tolerance to ensure that this is easy to achieve.
BrakeCheck 4 Forklift Trucks indicates whether the vehicle pulls to the left or right during braking.
Test results can be viewed on the display panel or downloaded to a PC for saving or printing. A printed report can also be produced at the time of testing using the portable infra-red printer.
BrakeCheck 4 Forklift Trucks operates off a rechargeable lithium-ion battery pack and will power-down after a period of inactivity to conserve energy.
Contact aide automotive on 0115 8456471 for questions, prices and training.
BrakeCheck - ForkLift Trucks

Brake Testing Fork Lift Trucks

Agricultural tractor Brake Test would meet the road worthines

March 2nd, 2018 Comments off

Tractors To Require An O Licence

Agricultural tractors “likely” to require an O-licence

aide automotive have recently seen media reports of agricultural vehicles possibly being made to meet better road safety regulations as per commercial vehicles on UK roads.
Commercial Motor published:
Agricultural tractors that carry out commercial haulage will be subject to roadworthiness testing requirements from next year – and are likely to fall under the O-licensing regime.
From 20 May 2018, operators of agricultural tractors capable of travelling more than 40km/h (approximately 25mph), used to carry commercial goods, will be required to undergo a roadworthiness test four years after their registration and every two years thereafter.
In its response to a consultation carried out last year, the DfT also noted that operators of such tractors would likely require an O-licence.
However, the RHA said the changes did not go far enough to address the concerns about competition, and said allowing tractors to carry freight will encourage more to be used for haulage.
“Ideally we would like to see these vehicles banned from moving freight on public roads entirely as their design is not equivalent to well-designed lorries for that task,” said policy director Duncan Buchanan.
“We do not believe that the frequency, four years for the first test then every two years, is justified. It looks very odd for heavy vehicles like these to be tested so infrequently when a 50cc moped is required to be tested every year after three years.”
The FTA’s head of policy and compliance information, James Firth, added: “If it looks like a truck or it’s doing the work of a truck, test it like a truck. Members in areas where agriculture is a primary economy have long raised concerns that agricultural tractor units, and specially developed fast tractors, were competing in the haulage market without being burdened by the same safety standards.”
On the subject of O-licensing, Buchanan added: “If it is the case then operators would need to obtain O-licences from when the vehicle was new. They should also have to comply with the same level of rigour as lorries.”
Vernon Hill, director at Kings Lynn-based Vernon Hill Agricultural Services, supported bringing tractors into the O-licensing regime.
He said: “An agricultural contractor friend of mine who runs lorries and tractors thinks the cost of each is very similar, so if farmers think they are saving money by not using a haulier they may be kidding themselves.
“If they are doing commercial haulage, why shouldn’t they be in scope of O-licensing?”
The weight and speed limits for farm tractors and trailers on UK roads increased in 2015. Tractors are not currently subject to mandatory testing.
If tractors are to fall under the O licence criteria, agricultural workshops and repair engineers will have to look at regular brake testing, one way to test tractor brakes is the BrakeCheck decelerometer.
Easy to use and with hard copy print options, brake testing a agricultural tractor with a BrakeCheck would meet the road worthiness requirement of an O licence.
Contact aide automotive on 0115 8456471 for BrakeCheck pricing and any further information that me be required.
Brake Tester For Farming Tractors

Test Agri Tractor Brakes With BrakeCheck

Protective shield for a Truck Fuel Tank Sender

January 17th, 2018 Comments off

Truck Sender Tank Security

New Sender Shield Protection

Sender Safe is a new product to help with fuel security around a Truck Diesel Fuel Tank.

Sender Safe is a robust and easy to fit protective shield for a Truck Fuel Tank Sender unit, increased protection of the fuel tank filler entry by fitting anti siphon devices has meant the Sender Unit is now the way to steal fuel.

The Sender Safe unit sits on top of the fuel tank attached by the fuel tank mounting straps, Sender Safe prevents access and damage to the Fuel Tank Sender Unit.

A recent enquiry from a northern haulier advised the cost of a Sender Rip out to be £800, that’s including the fuel stolen.

Cost effective and in house or on site fitting, Sender Safe takes one more step in fuel security.

aide automotive specialise in truck fuel tank security, with 3 unique products to protect a truck diesel tank.

Contact aide automotive on 0115 8456471 or via the contact page – aide automotive Contact!

 

Diesel Tank Sender & Alarms From aide automotive

Stop Truck Fuel Theft

Commercial 24 Volt Trailer Tester Van Installation

December 8th, 2017 Comments off

MT Globex Contract aide To Install TrailerCheck To Fleet Van

MT Globex is a West Midlands company that is strategically located at the heart of the UK’s motorway network, further supported by several partner depots across the UK.
MT Globex’s modern, highly maintained fleet of vehicles ensure that all their distribution operations are vastly efficient for customers with a minimal environmental footprint. Due to cutting edge, industry leading satellite tracking technology combined with fully trained transport planners with a wealth of transport knowledge, MT Globex ensure the fleet is fully utilised and thereby reducing empty mileage.
With a fleet of trailers to maintain MT Globex reviewed the TrailerCheck 4 Vanselectrical and diagnostics trailer tester as a tool to improve on trailer inspections and repairs.
Deciding to purchase the trailer tester, the next questions was: How and where shall we install the TrailerCheck in our van?
Consulting aide automotive, MT Globex decided the contract the install of the TrailerCheck to aide, utilising our experience and knowledge of best practice.
Fitting the TrailerCheck and associated accessories, MT Globex asked: Can you install the compressor as well? YES we can !
The install was completed at our workshop (on site installs also available) in one day.
If your trailer maintenance van needs a professional trailer tester with a professional install, contact aide automotive for a quote.
14 Volt Trailer Brake Tester

Commercial 24 Volt Trailer Tester Van Installation

Truck ISO ABS / EBS Susie – What Is It?

November 29th, 2017 Comments off

Faulty ISO7638 Line Can Cause Fatal Accidents

Some drivers aren’t aware of the role Of the ISO ABS / EBS Susie!

aide automotive have seen recent reports in the media of articualted truck drivers knwloedge of the ISO 7638 Susie.
We offer credit to the below article to Don Bur Ltd.
There is disturbing evidence to suggest that some drivers aren’t aware of the role and critical importance of the ABS ISO7638 line for articulated trailerswhilst in transit or, more worryingly, are deliberately leaving it disconnected.
The use of the ABS ISO7638 line (otherwise known as the EBS/ABS line) became law in May 2002 where the tractor and trailer are both provided with connections.
The EBS/ABS ‘Suzie’ connection provides electrical and data feeds to the trailer’s ECU or ‘brain’. The ECU then controls the anti-lock braking system (ABS), load sensing (LSV), roll stability (RSS) and suspension control which regulates the correct trailer ride height and, in turn, the overall trailer height.
So why then might a driver leave it disconnected? There are, surprisingly, a couple of reasons. Firstly, the roll stability system (RSS) automatically applies the brakes if the trailer is going too fast round a bend. This has an impact on both speed and fuel economy and, if a driver is either in a rush or targeted against fuel consumption, they might be tempted to disable this ‘inconvenient’ feature.
The other apathetically induced reason is that it just “doesn’t seem to do anything”. Indeed, when the driver pulls away, his/her brakes and lights will appear to work. What the driver may not understand is that they are more likely to experience jack-knifing, aquaplaning, brake lock, rollover, bridge strike and, more commonly, the fact that the 44T rig just won’t be able to stop as quickly when trying to avoid that pram that’s just peeked out from a line of parked cars.
So, just in case there is any lingering doubt, failure to connect the ABS ISO7638 line correctly results in the risk of catastrophic, life-threatening accidents. If the driver fails to use the line/ ‘Suzie’ correctly and there is a collision in which someone is killed, then the driver can face a charge of manslaughter.
aide automotive market a ISO7638 cable with fault indicator, so as well as having the cable correctly connected a driver can also be notified of any faults within the system. Again an electrical fault could have the same catastrophic effects as the ISO Susie cable being non connected.
ISOCheck lights bright RED when a fault is identified, if good to go the ISOCheck is continually lit bright GREEN.

ISO7638 Truck Tester

ISOCheck tests a trucks’ ISO sockets in order to help identify ABS or EBS faults.

80% Of Commercial Vehicle Brake Faults Cleared By Sensor Master

November 7th, 2017 Comments off

CV ABS & EBS Brake Repairs Made Easy!

The Sensor Master Clears 80% Of Commercial Vehicle Brake Faults

As the air braking world has changed, we have had to adapt the way we deal with diagnostic problems that can arise on our customers vehicle systems. As the air signalling system has been fazed out and replaced by the EBS / ABS system we have endeavored to keep up with the advancements in the technology and created our own range of testing equipment.
Our engineer is constantly updating the test equipment to match the needs that arise from his service visits, so are perfectly tuned to the EBS / ABS components that we supply.
Our test devices can be used in conjunction with the OE manufacturer’s testers to create a complete analysis structure for truck and trailers that is not only easy to use but also affordable to all sizes of fleet maintenance from owner / driver to multi fleet service garages.
Since 80% of all EBS / ABS problems are sensor related (Reported By Knorr Bremse & Wabco), by connecting to the sensor socket on each wheel, rather than the ECU, in effect, taking the quickest and most direct route, by going straight to the heart of the problem.
The Sensor Master DRA08 is a handheld EBS / ABS sensor and exciter ring tester, for use on trucks, trailers, and buses.
Lightweight and portable, the EBS /ABS CV Sensor Tester comes supplied with two 1.6m high quality cables, a sturdy carry case, short introductory printed manual, and a single 9V battery – everything, in fact, needed to use it straight out of the box.
Designed with ease of use in mind, the Commercial Vehicle ABS EBS Sensor Testertakes minutes to set-up, and, once connected, undertakes a complete test cycle of the six most common causes of EBS / ABS faults, at the touch of a button, in just 15 seconds – a fraction of the time it would take to perform the same tests manually.
Contact aide automotive to purchase this cost effective easy to use tester or buy online at our aide Online PayPal Shop.
Commercial Vehicle ABS EBS Tester

Truck ABS Faults Easily Found With Sensor Tester

Truck 360 Deg Camera Installation

October 31st, 2017 Comments off

ALTip Ltd Start A Fleet Install Of Camera’s & TankGuard

ALTip is a Derbyshire haulage business operating from Swadlincote, servicing the quarry industry in the area to destinations near and far. ALTip is a story which has developed over a period spanning nearly 5 years.

ALTip has made a considerable investment in making the truck fleet as safe as possible with the currently available technology. Installing 360 Deg Cameras and fuel theft prevention alarms is that start of a continued investment to meet the Silver FORS accreditation.

What is FORS For?
The aim of FORS is simple. One over-arching scheme that encompasses all aspects of safety, fuel efficiency, economical operations and vehicle emissions. FORS is a voluntary scheme that helps improve operators’ performance in each of these areas.
For vehicle operators, it offers peace of mind that they are meeting their legislative requirements, as well as helping to increase efficiency, reduce costs and win work.
FORS provides a quality and performance benchmark for van, lorry, mini-bus, coach and bus operators and allows access to a range of exclusive accreditation benefits.
Accreditation also provides us with the tools to become safer, greener and more efficient. It is an excellent way to prove to our existing and potential customers our credentials as a high performing operator who adheres to high quality standards.
aide automotive can supply and install multiple camera and safety products for all commercial vehicles.
Truck Camera FORS

FORS provides a quality and performance benchmark for van, lorry, mini-bus, coach and bus operators