Archive

Archive for September, 2019

Purchase Truck HGV Fresnel Lens Online

September 26th, 2019 Comments off

Truck Fresnel Lens Blind Spot Mirror – Purchase Online
Purchase The Truck Fresnel Lens Via PayPal

A Truck Fresnel Lens press-fits inside the truck’s passenger side window, like a mirror, a Fresnel Lens affords the driver a normal, (through the window) view of what’s close to his cab, not a reversed or inverted mirror image. That means the driver will assimilate any danger much faster and react far more quickly.

Due to a blind spot, drivers of trucks cannot see smaller vehicles or other vulnerable road users which are immediately next to the passenger side door of their HGV. These unseen road users can be hit if the truck changes lane in their direction.

London has become the first city in Britain to fine the drivers of HGVs not fitted with equipment to protect cyclists.

Price List

1 x Truck Fresnel Lens – £9.99 + VAT = £11.99 Purchase Via PayPal Now

2 x Truck Fresnel Lens – £19.98 + VAT = £23.98 Purchase Via PayPal Now

5 x Truck Fresnel Lens – £47.50 + VAT = £57.00 Purchase Via PayPal Now

To purchase multiple Fresnel Len’s, use the open value PayPal link below, multiply the price against the required quantity, don’t forget to add the VAT.

Purchase Multiple Fresnel Lens Via PayPal

Prefer to purchase using a credit card? Please call on 0115 8456471, all cards accepted.

We aim to dispatch your order within 48 working hours, VAT invoices will be emailed upon dispatch.

All orders are bound by aide automotives terms & condition’s, copies supplied upon request.

Truck Blind Spot Lens Receives Excellent Feedback

Fresnel lenses are now accepted by Transport for London

Purchase Bowmonk Printer Paper Rolls

September 26th, 2019 Comments off

#Bowmonk BrakeCheck Printer Paper Rolls #Purchase Online
Purchase #BrakeCheck #Printer #Paper Rolls Via #PayPal

@aideautomotive

 

Supplied in Packs of 10 or boxes of 20, these Printer Paper Rolls are Thermal Paper.

10 x Bowmonk Printer Paper Rolls – £15 + Shipping (£5.95) + VAT = £25.14

Box of 20 Bowmonk Printer Paper Rolls – £30 + Shipping (£9.95) + VAT = £47.94

We aim to dispatch your order within 48 working hours, VAT invoices will be emailed upon dispatch.

Wishing to purchase using a credit card? Please call on 0115 8456471, all cards accepted.

All orders are bound by aide automotives terms & condition’s, copies supplied upon request

aide automotive Ltd Supply Bowmonk

Bowmonk BrakeCheck Printer Paper Rolls

Commercial Vehicle Caliper Tester

September 24th, 2019 Comments off

HGV Brake Caliper Tester

The tester is used to check the potentiometers (wear indicators) in brake calipers and for the determination of the wear of the brake disc and brake pads.

The practice of checking a potentiometer for faults and replacement could save a commercial vehicle operator thousands instead of complete caliper replacements!!

The reported practise of replacing a complete calipers rather than testing and replacing a potentiometer is in the past if you own an aide automotive Potentiometer Tester.

The procedure for checking the potentiometer can be carried out with the caliper installed on the vehicle or with the caliper removed, simply connect the supplied correct cable to the brake potentiometer, power the tester and choose which type you are testing, MAN / Mercedes 3 Wire Gold DAF / Mercedes 2 Wire Scania / Iveco /
Mercedes 3 Wire Silver

The display will show the voltage, pad wear percentage & bar graph.

To set a new potentiometer simply wind the potentiometer until the display show 0 %, done!!

To test a potentiometer, wind the potentiometer until about 2.75 volts, this will show low pads warning and then to 100% for failure warning. SIMPLE!!

So start testing & replacing potentiometers to save money today!!
Buy Online Here HGV Caliper Tester

HGV Caliper Tester

Truck Potentiometer Tester For Brake Calipers

DVSA Suggests More HGV Brake Tests ??

September 11th, 2019 Comments off

aide automotive explains why its portable Bowmonk BrakeCheck solution is a viable alternative to roller brake testers when carrying out a non-MOT brake test.
Regular brake tests are currently being requested by the DVSA on all commercial vehicles of 7.5 tonne and over, as part of an interim safety inspection. At the absolute minimum, the agency is asking for a quarterly voluntary brake test to be carried out in addition to the annual MOT test.

Fortunately, most commercial operators have taken heed of this request and are having their brakes checked more frequently, as it is a means of monitoring braking efficiency more closely. However, in some cases, it would appear that this frequency of testing is still not enough, as the level of deterioration is a cause for concern.

In most cases, the DVSA would prefer this test to be carried out as part of the six-weekly inspection. This would have thebenefit of highlighting a decrease in braking performance considerably sooner than those performed once every three months, and in doing so, afford more effective preventative maintenance opportunities.

Evidently, there are a great number of commercial workshops who are still of the misconception that all of the aforementioned brake tests have to be performed on a roller brake tester. This is not the case! The Traffic Commission has allowed the use of a DVSA-approved brake tester, like Bowmonk’s BrakeCheck, for all non-MOT brake tests.

Aside from the mandatory requirements, there is also the upsell opportunity. Workshops providing a brake overhaul service, where components are in need of replacement, can offer a ‘before and after’ brake test report; an opportunity to show their customers the level of efficiency achieved prior to and following any necessary repair work.

A user guide to BrakeCheck

Position the BrakeCheck unit on a level surface, such as the passenger side foot well. Switch the unit on by pressing and holding the ‘Menu’ button until ‘Sbr’ appears in the display.
Confirm Service Brake choice by pressing ‘Enter’.
When the unit is level enough to start the test, a symbol (pictured left) will be shown on the display. Once the symbol is displayed, press ‘Enter’.
The unit is now ready for the test. When the test area is clear, accelerate the vehicle to an appropriate test speed (e.g. 20 mph).
Once the vehicle is travelling at an appropriate test speed, check for traffic approaching from behind. If safe to do so, apply the footbrake as a controlled emergency stop, without skidding.
Once the vehicle has been brought to a complete stop, the unit will generate and display a braking efficiency value.
Once the Service Brake test is complete, change to Hand Brake mode by pressing the ‘Menu’ button (so that the hand brake test LED is illuminated). As before, confirm this choice by pressing ‘Enter’, which will take you to the levelling display. Press ‘Enter’ when the level indicator is shown.
As before, accelerate the vehicle to the test speed, this time applying the hand brake to stop the vehicle. Note: please check with your vehicle manufacturer if this type of procedure is acceptable.
Once the vehicle has come to a complete stop, the display will show the braking efficiency of the hand brake.
To view the service brake test report, press the ‘Menu’ button until the last test result and service brake test LEDs are illuminated. Then press ‘Enter’ to display the result, which can now be printed using the optional wireless printer.
With the BrakeCheck unit positioned approximately 2 to 3cm in front of the infra-red printer, switch on the printer and press the ‘Print’ button on the BrakeCheck to print the test result.
To view or print the hand brake test, carry out the same procedure, but use the ‘Menu’ button to illuminate the hand brake test and last test result LEDs.

Buy Online Bowmonk BrakeCheck Decelerometer

HGV Brake Tester

Buy Online Bowmonk BrakeCheck Decelerometer

HGV  / Commercial Vehicle Brake Testing 

September 3rd, 2019 Comments off

Although the DVSA states a preference for roller brake testers during safety inspections, it does allow the use of portable decelerometers. What are their advantages and limitations of using portable decelerometers?

Every safety inspection must assess the braking performance of a vehicle or trailer. It’s a key part of any maintenance regime and demonstrates that operators are running their fleets in a compliant manner and protecting other road users. The DVSA’s Guide to Maintaining Roadworthiness states that using an approved and calibrated decelerometer is acceptable to measure overall brake efficiency values for vehicles as part of the yearly maintenance scheme.

We do hear that testers are “strongly advised” to use a calibrated roller brake tester (RBT) at each safety inspection to measure individual brake performance and overall braking efficiencies for the vehicle or trailer according to the annual test standards.

Why is this? And when should each type be used?

There are two main types of portable decelerometer: digital and mechanical. Both are straightforward to use, although care has to be taken: “To use a decelerometer, the vehicle must be driven on the road, or in a yard with enough space. This should be a good surface, which is suitable in wet or dry conditions, with little traffic.

As the guidance states the use of an RBT or calibrated decelerometer can be used, it is obvious to most that a roller brake tester is far better way of determining brake efficiency. Very true would be an educated response although a combination of Roller Brake Tests and regular decelerometers test is as good a record of brake tests as possibly can be offered.

So is a portable decelerometer vulnerable to mis-testing?, a DVSA spokesman explains: “Anecdotally, the DVSA is aware of potential risks due to user error, although the DVSA has no data on this. Also, roller brake testing provides a more consistent test, whereas decelerometer use may involve some environmental variations such as test speed, road surface, weather, or gradient of the road.”

Speaking about the restriction on using decelerometers with tractor-trailer combinations, the spokesman adds: “Assessing different parts of a tractor and trailer combination can be difficult with only a decelerometer. For this reason, rigid vehicles such as buses and non-articulated lorries are more acceptable uses of decelerometers.”

The DVSA spokesman says that manufacturers provide guidance on the use of decelerometers. Risk assessments need to be in place where decelerometers are being used for brake testing, and the tests must be carried out under controlled and safe conditions.

Another decelerometer supplier is Bowmonk. Its portable brake testing kit, BrakeCheck, is also approved by the DVSA. Bowmonk says RBTs are not more accurate, but are preferred for annual tests because they “provide a means of recording each individual brake performance, whereas a decelerometer records the overall braking performance”. He adds: ”DVSA allows all operators to use a BrakeCheck for all of their interim brake tests that form part of their scheduled safety inspections.”

Bowmonk’s equipment was approved because it was able to demonstrate that the readings of overall braking efficiency and percentage of braking imbalance recorded by the device were within a specified level of tolerance, compared to that of an RBT. “BrakeCheck records the rate of acceleration from vehicle rest to the point where the brakes are applied. At this point it detects the forces being shifted forward, and then records the rate of deceleration to the point where the vehicle comes to a complete stop. From this, BrakeCheck then calculates the stopping distance, test speed and ultimately the braking efficiency.”

Any competent vehicle technician can use a BrakeCheck decelerometer without training, although training can be offered.

Adds Dave Wood, DVSA enforcement policy manager: “Under controlled and limited situations, decelerometer testing still has a place. As electronic braking performance monitoring systems gain popularity, we would like to encourage operators to use such systems as part of their vehicle defect monitoring and maintenance regime.”

FIXED BRAKE TESTERS

DVSA says it strongly advises calibrated RBTs “because this is the method of brake testing used by the MOT and is supported by legislation“.

Steve Coles, head of MOT operations at the Retail Motor Industry Federation, confirms that an RBT measures a greater number of elements of brake performance than a decelerometer. He states: “Performance efficiency, binding, fluctuation, increase and reduction of brake effort can all be measured, whereas a decelerometer can only check efficiency and a very rudimentary check of imbalance, which is subjective rather than measured.”

One reason DVSA prefers RBTs is road safety: “Having vehicles conduct emergency stops on public roads using a decelerometer carries a certain risk to other road users that is alleviated if the vehicle is tested in a workshop using an RBT.”

Approved MOT stations must have a fixed brake tester, either roller brake (pictured above) or plate brake tester. Boston’s Tabor says: “Roller brake testers are the most commonly used, since they require less space. The only exception to a fixed brake tester may be a remote part of the country, for example some Scottish islands, but this is rare, if not now a discontinued practice.”

To meet DVSA criteria, all equipment used in the test lane – fixed or otherwise – has to be approved by, for example, the Garage Equipment Association (list of approved equipment: ). Explains Tabor: “The reason for this is to make sure that regardless of where the vehicle is tested and on what make of equipment, the result will be the same. To maintain accuracy, fixed brake testers must be calibrated every six months and certificates to prove accuracy are issued to the test station. Decelerometers must meet mandatory standards and also need calibrating every two years. The longer period between calibrations is because they are only there for temporary use.”

FURTHER INFORMATION

For a meaningful brake test, DVSA recommends that the vehicle should be at least 65% loaded, where possible.

BOX: CRIME AND PUNISHMENT

In 2017, the boss of Grittenham Haulage and its mechanic were jailed after one of their tipper trucks crashed, killing four people, due to faulty brakes. The judge at Bristol Crown Court said Matthew Gordon and Peter Wood had a “cavalier“ attitude to vehicle maintenance at their firm before the incident in 2015.

Gordon told the court that he had been unaware brake checks had to be carried out every four months and admitted that he didn’t have a transport manager in place. Gordon was jailed for more than seven years; Wood for more than five.

After the sentencing, DCI Richard Ocone said: “Detailed and complex investigations showed many of the faults on the vehicle were longstanding – highlighted by the fact that the brakes on the lorry at the time of the crash were totally inadequate, having an overall efficiency of just 28%.”

Bowmonk BrakeCheck Purchase Online

Or call 0115 8456471 to discuss your HGV brake maintenance requirement

 

Bowmonk BrakeCheck Decelerometer

BrakeCheck is DVSA (VOSA) accepted & MOT approved.