Archive

Posts Tagged ‘potentiometers’

Brake Caliper Tester & A Customer Profile On TankGuard Fuel Theft Alarm

November 25th, 2019 Comments off

aide automotive’s Monthly News Letter Is Out!

Featuring the NEW PoTesta Brake Caliper Tester & A Customer Profile On TankGuard Fuel Theft Alarm Installation.

PoTesta used to check the potentiometers (wear indicators) in brake calipers and for the determination of the wear of the Truck & Trailer brake disc and brake pads.

TankGuard a Truck Fuel Theft Alarm is being installed At Brian Yeardly International, TankGuard Fuel Theft Alarm is a relatively easy aftermarket installation with the option of adding a second sensor for dual fuel tanks. Go to our website to sign up for the Monthly News Letter Straight to your inbox!

www.aideautomotive.com

 

Stop Truck Fuel Theft

Brake Caliper Tester & Truck Diesel Alarm Feature In November

Trailer Repair Tester & Diagnostics

November 13th, 2019 Comments off

aide automotive offer a range of commercial vehicle (Truck, Trailer & Bus) Repair Tester & Diagnostics.

Trailer Inspections Using TrailerCheck Specialist Truck & Trailer Services Says “TrailerCheck Is A Superb bit of Kit” aide automotive recently supplied a TrailerCheck & Code Talk Diagnostic System to Specialist Truck & Trailer Services Ltd. Owner Charlie is so impressed with the kit he recently Tweeted “Another day on trailer inspections using @aideautomotive van trailer check system. Superb bit of kit”. TrailerCheck has a micro processor controlled circuit board to enable safe trailer testing and power conservation, enabling a engineer to test multiple trailer from single charged battery supply, if using batteries to power the trailer tester a split van charger can be purchased for battery recharging while the travelling, further more mains power options are available. TrailerCheck also has the bonus of a diagnostics interface and REMOTE controller, Code Talk is an aftermarket engineers diagnostic tool, designed by UK trailer maintenance engineers for engineers. Simple to use and operate, Code Talk makes trailer diagnostic maintenance an affordable option to any repairer.

EBS/ABS Sensor and Exciter Ring Tester The SensorMaster is compatible with 90% of applications as standard. It works with any ABS/EBS system made by Knorr Bremse, Haldex or Wabco fitted to any type of commercial vehicle whether it be truck, trailer, bus or coach. The SensorMaster tests for the following causes of sensor related faults: Correct OHMS resistance Open Circuit Short Circuit Pole ring tooth damage Pole ring mis-alignment Sensor gap measurement Lightweight, portable and simple to operate The SensorMaster is supplied with a 1.6m high quality cable and a separate universal adapter for those applications where the standard lead’s termination is not applicable. The EBS / ABS Sensor Tester comes ready to use straight out of the box.

PoTesta (HGV Brake Caliper Tester). This tester is used to check caliper potentiometer readings and to determine the wear status of brake discs and brake pads. Brake discs and brake pads are some of the most important wearing parts on vehicles. Before replacing them it is worth testing them with an automotive Potentiometer Tester. To check the potentiometer simply connect the corresponding cable to the brake potentiometer, power the tester and choose which type you are testing. This can be can be carried out with the caliper installed on the vehicle or with the caliper removed.

Contact aide automotive For Prices & Tech Information – 0115 8456471

Trailer Diagnostic

EBS/ABS Sensor & Exciter Ring Tester SensorMaster is compatible with 90% of applications as standard. It works with any ABS/EBS system / Knorr Bremse, #Haldex or #Wabco fitted to any type of commercial vehicle whether it be #truck, #trailer, #bus or coach

Commercial Vehicle Caliper Tester

September 24th, 2019 Comments off

HGV Brake Caliper Tester

The tester is used to check the potentiometers (wear indicators) in brake calipers and for the determination of the wear of the brake disc and brake pads.

The practice of checking a potentiometer for faults and replacement could save a commercial vehicle operator thousands instead of complete caliper replacements!!

The reported practise of replacing a complete calipers rather than testing and replacing a potentiometer is in the past if you own an aide automotive Potentiometer Tester.

The procedure for checking the potentiometer can be carried out with the caliper installed on the vehicle or with the caliper removed, simply connect the supplied correct cable to the brake potentiometer, power the tester and choose which type you are testing, MAN / Mercedes 3 Wire Gold DAF / Mercedes 2 Wire Scania / Iveco /
Mercedes 3 Wire Silver

The display will show the voltage, pad wear percentage & bar graph.

To set a new potentiometer simply wind the potentiometer until the display show 0 %, done!!

To test a potentiometer, wind the potentiometer until about 2.75 volts, this will show low pads warning and then to 100% for failure warning. SIMPLE!!

So start testing & replacing potentiometers to save money today!!
Buy Online Here HGV Caliper Tester

HGV Caliper Tester

Truck Potentiometer Tester For Brake Calipers

Truck Potentiometer Tester For Brake Calipers

June 25th, 2019 Comments off

Commercial Vehicle Brake Caliper Tester

The tester is used to check the potentiometers (wear indicators) in brake calipers and for the determination of the wear of the brake disc and brake pads.

The practice of checking a potentiometer for faults and replacement could save a commercial vehicle operator thousands instead of complete caliper replacements!!

The reported practise of replacing a complete calipers rather than testing and replacing a potentiometer is in the past if you own an aide automotive Potentiometer Tester.

The procedure for checking the potentiometer can be carried out with the caliper installed on the vehicle or with the caliper removed, simply connect the supplied correct cable to the brake potentiometer, power the tester and choose which type you are testing, MAN / Mercedes 3 Wire Gold DAF / Mercedes 2 Wire Scania / Iveco / Mercedes 3 Wire Silver

The display will show the voltage, pad wear percentage & bar graph.

To set a new potentiometer simply wind the potentiometer until the display show 0 %, done!!

To test a potentiometer, wind the potentiometer until about 2.75 volts, this will show low pads warning and then to 100% for failure warning. SIMPLE!!

So start testing & replacing potentiometers to save money today!!

Visit the aide automotive Ltd website for more information on Commercial Vehicle Brake Caliper Tester

 

HGV Caliper Tester

Truck Potentiometer Tester For Brake Calipers