Archive

Posts Tagged ‘brake efficiency’

Portable Brake Tester Designed Specifically For Forklift Trucks

March 9th, 2018 Comments off

Forklift Trucks Brake Testing With BrakeCheck FLT

The BrakeCheck 4 Forklift Trucks (FLT) is our portable brake tester designed specifically for forklift trucks.
The Bowmonk BrakeCheck FLT is a fully self-contained, user-friendly, portable brake tester, which has been developed with a leading forklift truck manufacturer to take account of the slow speed and tilt of forklift truck vehicles. The instrument records the braking efficiency and percentage of braking imbalance in a matter of minutes.
The Bowmonk BrakeCheck FLT determines braking efficiency of both the Service Brake (Foot Brake) and Hand Brake by measuring the rate of deceleration from normal operating speed until the vehicle comes to rest.
The BrakeCheck FLT is the perfect tool to assist with LOLER/PUWER safety inspections.
Designed to be self-compensating, this Fork Lift Truck Brake Meter will indicate on the LED screen when it is positioned level enough to perform a brake test, with a generous tolerance to ensure that this is easy to achieve.
BrakeCheck 4 Forklift Trucks indicates whether the vehicle pulls to the left or right during braking.
Test results can be viewed on the display panel or downloaded to a PC for saving or printing. A printed report can also be produced at the time of testing using the portable infra-red printer.
BrakeCheck 4 Forklift Trucks operates off a rechargeable lithium-ion battery pack and will power-down after a period of inactivity to conserve energy.
Contact aide automotive on 0115 8456471 for questions, prices and training.
BrakeCheck - ForkLift Trucks

Brake Testing Fork Lift Trucks

Agricultural tractor Brake Test would meet the road worthines

March 2nd, 2018 Comments off

Tractors To Require An O Licence

Agricultural tractors “likely” to require an O-licence

aide automotive have recently seen media reports of agricultural vehicles possibly being made to meet better road safety regulations as per commercial vehicles on UK roads.
Commercial Motor published:
Agricultural tractors that carry out commercial haulage will be subject to roadworthiness testing requirements from next year – and are likely to fall under the O-licensing regime.
From 20 May 2018, operators of agricultural tractors capable of travelling more than 40km/h (approximately 25mph), used to carry commercial goods, will be required to undergo a roadworthiness test four years after their registration and every two years thereafter.
In its response to a consultation carried out last year, the DfT also noted that operators of such tractors would likely require an O-licence.
However, the RHA said the changes did not go far enough to address the concerns about competition, and said allowing tractors to carry freight will encourage more to be used for haulage.
“Ideally we would like to see these vehicles banned from moving freight on public roads entirely as their design is not equivalent to well-designed lorries for that task,” said policy director Duncan Buchanan.
“We do not believe that the frequency, four years for the first test then every two years, is justified. It looks very odd for heavy vehicles like these to be tested so infrequently when a 50cc moped is required to be tested every year after three years.”
The FTA’s head of policy and compliance information, James Firth, added: “If it looks like a truck or it’s doing the work of a truck, test it like a truck. Members in areas where agriculture is a primary economy have long raised concerns that agricultural tractor units, and specially developed fast tractors, were competing in the haulage market without being burdened by the same safety standards.”
On the subject of O-licensing, Buchanan added: “If it is the case then operators would need to obtain O-licences from when the vehicle was new. They should also have to comply with the same level of rigour as lorries.”
Vernon Hill, director at Kings Lynn-based Vernon Hill Agricultural Services, supported bringing tractors into the O-licensing regime.
He said: “An agricultural contractor friend of mine who runs lorries and tractors thinks the cost of each is very similar, so if farmers think they are saving money by not using a haulier they may be kidding themselves.
“If they are doing commercial haulage, why shouldn’t they be in scope of O-licensing?”
The weight and speed limits for farm tractors and trailers on UK roads increased in 2015. Tractors are not currently subject to mandatory testing.
If tractors are to fall under the O licence criteria, agricultural workshops and repair engineers will have to look at regular brake testing, one way to test tractor brakes is the BrakeCheck decelerometer.
Easy to use and with hard copy print options, brake testing a agricultural tractor with a BrakeCheck would meet the road worthiness requirement of an O licence.
Contact aide automotive on 0115 8456471 for BrakeCheck pricing and any further information that me be required.
Brake Tester For Farming Tractors

Test Agri Tractor Brakes With BrakeCheck

Motorhome Brake Testing

August 14th, 2017 Comments off

While Serving A Motorhome, Why Not Offer A Brake Test?

Check brakes and stay safe on the road this summer!!

BrakeCheck is a portable, DVSA-approved Brake Tester for all MOT class vehicles.
BrakeCheck determines braking efficiency of both the Service Brake (Foot Brake) and Hand Brake by measuring the rate of deceleration from a speed of around 20 mph (Service Brake) 10 mph (Foot Brake) until the vehicle comes to rest.
With no connection to the vehicle and designed to be self-compensating, the brake tester will indicate on the LED screen when it is positioned level enough to perform a brake test, with a generous tolerance to ensure that this is easy to achieve.
The BrakeCheck decelerometer indicates whether the vehicle pulls to the left or right during braking, and reports the overall brake efficiency of the service and hand brake. Brake test results and be compared to MOT guidelines for roadworthy vehicles.
Test results can be viewed on the display panel or downloaded to a PC for saving or printing. A printed report can also be produced at the time of testing using the portable infra-red printer.
Following the service of a Motor home or vehicle, caravan service engineers could add a hard copy brake performance test, offering confidence and professionalism to the service.
Click on Motor home Brake Testing to read more and review a sample print out.
Please do not hesitate to call to discuss further the way a decelerometer conducts a brake test – aide automotive ltd 0115 8456471
Decelerometer Bowmonk

Motor Home Brake Tester For Servicing Or MOT

Bowmonk BrakeCheck User Manual Guides Available To Download

June 27th, 2017 Comments off

Bowmonk BrakeCheck User Manual  / Guide

BrakeCheck User Guides Available To Download

The Bowmonk BrakeCheck has been an impressive simple to use brake meter for many fleet operators around the world.

Even so the help of a quick user guide is always required and offer confidence the brake tester is being used correctly.
All customer can now download the main quick reference guide from our PDF download centre, To do so, go the the BrakeCheck page and towards the bottom of the page, Click on the “Download Product Data Sheet” Button.
This will then direct the user into the PDF download page where the BrakeCheck user guide can be downloaded, the BrakeCheck Print Out Explanation Guide can also be downloaded.
The Quick Reference User Guide we offer is all you should need, but if a user has any uncertainty then please call the mobile number detailed on the side of your BrakeCheck for vocal training or support.
Contact aide automotive for Bowmonk BrakeCheck Sales & Support – 0115 8456471
Decelerometer For HGV's

BrakeCheck Conducts DVSA HGV Brake Tests

Brake Testing, Servicing & Diagnostic Tools for Commercial Vehicle Workshops

May 24th, 2017 Comments off

Brake & Diagnostic Products from aide automotive

 

Truck & Bus Product Focus Feature Brake Servicing & Diagnostics had a wealth of product information recently.

aide automotive advertised a range of Brake Testing, Servicing & Diagnostic Tools for commercial vehicle workshops.
With the Bowmonk BrakeCheck Portable Decelerometer Printer kit, a workshop can meet the 3 additional required brake tests with minimum fuss
For Trailer Servicing & Diagnostics, aide offer a complete Trailer Electrical (ABS Light & EBS CAN Line Test), Light and Air Brake Tester with Diagnostics interface for Trailer ECU Code Reading / Clearing and management data viewing.
EBS/ABS Sensor Master testing can be conducted with the Sensor Master, while Battery Diagnostics Tests with a Midtronics MDX Battery Tester.
Contact aide automotive for any questions via email – info@aideautomotive.comor phone 0115 8456471
Bowmonk BrakeCheck

Brake Testing, Servicing & Diagnostic Tools for Commercial Vehicle Workshops

HGV Brake Testing Essential

April 13th, 2017 Comments off

Truck, Bus & Coach Brake Testing

Following The Bath Tipper Incident Inquiry HGV Brake Testing Essential

Following the Bath Tipper Incident inquiry one would make a educated judgement to make sure all brakes and testing of brakes on HGV or Commercial vehicles are examined, maintained and tested with the appropriate recorded paper work.
The inquiry showed the Bath tipper truck to have been poorly maintained which resulted when tested to have a very poor brake efficiency.
aide automotive recommend the use of roller brake testers and decelerometers within a 12 month maintenance and testing policy.
Regular testing on RBT’s and then an in-between decelerometer test like BrakeCheck will offer printed brake reports for service or inspection sheets to complete a maintenance policy for any heavy vehicle operator.
You can dear more of he DVSA’s Heavy vehicle brake test: best practice online.
In the near future aide automotive will be offering On Site Roller Brake Testing, we will visit, test and report on truck, Bus, Coach or Trailer brakes using a calibrated RBT with print out facility.
Contact aide automotive to discuss the use of decelerometers or Roller Brake Testers – 0115 8456471
Decelerometer For HGV's

BrakeCheck Conducts DVSA HGV Brake Tests

Truck & Trailer Brake Testing With An Infra Red Gun

March 22nd, 2017 Comments off

For Christmas 2016 aide automotive are offering a GIVE AWAY deal!

We have 4 Infra Red Temperature Guns to Give Away via a simple question.
Firstly though; Why An Infra Red Temp Gun??
Infra Red Temperature guns are a excellent Brake Tester for checking individual wheel disks or drums to determine brake activation.
We have heard that the DVSA often recommend the use of Infra Red Temperature Guns and see them as good practice in any Commercial Vehicle Fleet or Truck Workshop.
With the ease of just pointing the Infra Red Light at the wheel hub from the outer edge of a trailer or truck and without removing wheels, an infra Red Temp Gun can indicate if a wheel is not braking efficiently as compared to the other wheels on the vehicle.
We have reports of one Truck Driver stating “Been stopped about 10 times in my driving career over 30 years, the last time, he pointed a thermometer at my wheel hubs & explained to me that one was running cool, meaning that is wasn’t doing its job, I was amazed by the technology, didn’t realise that you could get a temperature reading with a laser/infrared light without even touching the hub. Got the workshop to adjust the brakes when I got back to the yard”
So if you want an early Christmas pressie, email us on matt@aideautomotive.com with the answer to this question.
The DVSA Now recommend 4 Commercial Vehicle Brake tests per year using an RBT or decelerometer; whats does RBT stand for?
DVSA Method Of Road Side Truck Brake Check

Use An Infra Red Temp Gun For Brake Testing

BrakeCheck is the number one brake tester for commercial vehicle inspections sheets

February 22nd, 2017 Comments off

Decelerometer BrakeCheck Offers Great Reliability

BrakeCheck Decelerometer Includes 2 Years Warranty

aide automotive have improved our customer service by increasing the warranty from 1 to 2 years on the BrakeCheck decelerometer!

BrakeCheck is the number one brake tester for commercial vehicle inspections sheets and with over 18,000 testers sold BrakeCheck is surely the number one reliable tester on the market.

aide auto’s Matthew Burke Says “Since the launch of BrakeCheck in 2001 we have been continually looking at way to improve the tester for reliability and operational, with BrakeCheck Series 2 we now have the over whelming confidence to offer a two year warranty, operationally the BrakeCheck product is at the very top of its product sector and now we feel its top for reliability.”

BrakeCheck is a portable battery-powered device that can be used by vehicle workshops, government traffic authorities, testing and inspection stations to test and report on vehicle brake efficiency. BrakeCheck is DVSA accepted for commercial vehicles & is MOT approved for all vehicle classes.

aide automotive can supply pricing quotes and full immediate technical support to all!

 

Decelerometer For HGV's

BrakeCheck Conducts DVSA HGV Brake Tests

DVSA Recommend 4 Truck, Bus & Coach Brake Tests Per Year

December 8th, 2016 Comments off

No more inspection sheets with “Brakes OK, On Road Test”

Since April 2014 the DVSA have been recommending commercial vehicles undertake 4PSV or  Truck brake tests per year!

Many operators have moved with the guidance but still over 2 years passed many commercial vehicle operators are unaware of the guidance.

The guidance states:

Document :Guide to maintaining road worthiness
Commercial goods and passenger carrying vehicles (Revised 2014)

Section 5: Safety inspection and repair facilities

Extract –
“Therefore it is normally expected that the vehicle or trailer should complete at least three successful brake efficiency tests spread throughout year in addition to the annual MOT test.”

An operator can take the decision to carry out brake tests using roller brake tests or a decelerometer like BrakeCheck.

Many bus & coach companies use a decelerometer, here at aide automotive we have sold many brake testers recently with feedback from one customer saying:

“A necessary piece of kit in today’s transport, does the job perfectly – Inwood Logistics”

BrakeCheck is portable brake tester that works from the principle of measuring deceleration or Brake Efficiency, BrakeCheck is cost effective for any commercial vehicle workshop costing as low as £470 for a PC Downloading Kit & £572 for a printer kit, BrakeCheck is ideal!

To discuss BrakeCheck options and requirements please do not hesitate to contact aide automotive on 0115 8456471

 

Truck Inspection Brake Tester

MOT Test Station in the area to be able to offer testing for HGVs and PSVs

Decelerometer Brake Testers Price Offers

May 20th, 2016 Comments off

aide automotive have a range of bargain BrakeCheck decelerometers & Tapley Meters available for immediate sale!

As we are now getting so close to Christmas, we thought we would offer some Christmas Cracking Deals!

Sale 1 – ITEM SOLD AS OF 02.12.15 12.30 PM
A BrakeCheck Series 2 With PC Download Kit – RRP £464 + VAT – We are able to offer this Kit for Just £300 + VAT. Calibrated for 24 months we will offer a 3 month warranty on the full kit.
The full kit contains – BrakeCheck, Charger, CabCheckS Download Disc & USB PC Cable.

Sale 2 –
A BrakeCheck Series 1 – Calibrated for 24 months & with 3 months warranty, we are offering this tester for just £210.00 + VAT, If you need a printer add £145.00 + VAT (printer will be new). BrakeCheck comes with charger & case!

Sale 3 –
Tapley Brake Meter – The old man of brake meters, this mechanical brake tester is in excellent condition. Calibrated for 24 months with 3 months warranty.

Prices exclude VAT & Carriage.

These offers will sell fast so please call or email to purchase ASAP!

Call 0115 8456471

Truck Brake Tester

BrakeCheck Decelerometer Price Offers