Archive

Posts Tagged ‘Truck Diagnostics’

ISO7638 Truck & Trailer Tester

July 19th, 2019 Comments off

#Commercial #Vehicle Workshop is a business magazine for companies and individuals involved in all aspects of commercial vehicle servicing.

#Trailer #Servicing & fault finding was featured in the recent July issue with an advert from aide automotive detailing the #ISOCheck.

ISOCheck EBS will test all electronic braking systems, #Wabco, Knorr #Bremse and #Haldex, covering the differences between the early generations and the latest.

ISOCheck really becomes the perfect test tool on a dark wet night, the quick test and the bright (Green) OK / Fault (Red) answer increases test and repair efficiency.

ISOCheck can be used as a constant visual aide on any truck and trailer but possibly especially for double decker trailers. Double decker trailers with a defective EBS system would vastly increase the chances of roll over or jack-knife. With ISOCheck in place a driver or depot gateman would be able to see the RED warning light.

To read the full article on Trailer Servicing, go to the CVW Magazine website to review an online copy.

Contact aide automotive on 0115 8456471 to learn more about #ISO7638 testing for truck & trailer.

 

#Commercial #Vehicle Workshop is a business magazine for companies

ISOCheck EBS will test all electronic braking systems, #Wabco, Knorr #Bremse and #Haldex

Truck Potentiometer Tester For Brake Calipers

June 25th, 2019 Comments off

Commercial Vehicle Brake Caliper Tester

The tester is used to check the potentiometers (wear indicators) in brake calipers and for the determination of the wear of the brake disc and brake pads.

The practice of checking a potentiometer for faults and replacement could save a commercial vehicle operator thousands instead of complete caliper replacements!!

The reported practise of replacing a complete calipers rather than testing and replacing a potentiometer is in the past if you own an aide automotive Potentiometer Tester.

The procedure for checking the potentiometer can be carried out with the caliper installed on the vehicle or with the caliper removed, simply connect the supplied correct cable to the brake potentiometer, power the tester and choose which type you are testing, MAN / Mercedes 3 Wire Gold DAF / Mercedes 2 Wire Scania / Iveco / Mercedes 3 Wire Silver

The display will show the voltage, pad wear percentage & bar graph.

To set a new potentiometer simply wind the potentiometer until the display show 0 %, done!!

To test a potentiometer, wind the potentiometer until about 2.75 volts, this will show low pads warning and then to 100% for failure warning. SIMPLE!!

So start testing & replacing potentiometers to save money today!!

Visit the aide automotive Ltd website for more information on Commercial Vehicle Brake Caliper Tester

 

HGV Caliper Tester

Truck Potentiometer Tester For Brake Calipers

80% Of Commercial Vehicle Brake Faults Cleared By Sensor Master

November 7th, 2017 Comments off

CV ABS & EBS Brake Repairs Made Easy!

The Sensor Master Clears 80% Of Commercial Vehicle Brake Faults

As the air braking world has changed, we have had to adapt the way we deal with diagnostic problems that can arise on our customers vehicle systems. As the air signalling system has been fazed out and replaced by the EBS / ABS system we have endeavored to keep up with the advancements in the technology and created our own range of testing equipment.
Our engineer is constantly updating the test equipment to match the needs that arise from his service visits, so are perfectly tuned to the EBS / ABS components that we supply.
Our test devices can be used in conjunction with the OE manufacturer’s testers to create a complete analysis structure for truck and trailers that is not only easy to use but also affordable to all sizes of fleet maintenance from owner / driver to multi fleet service garages.
Since 80% of all EBS / ABS problems are sensor related (Reported By Knorr Bremse & Wabco), by connecting to the sensor socket on each wheel, rather than the ECU, in effect, taking the quickest and most direct route, by going straight to the heart of the problem.
The Sensor Master DRA08 is a handheld EBS / ABS sensor and exciter ring tester, for use on trucks, trailers, and buses.
Lightweight and portable, the EBS /ABS CV Sensor Tester comes supplied with two 1.6m high quality cables, a sturdy carry case, short introductory printed manual, and a single 9V battery – everything, in fact, needed to use it straight out of the box.
Designed with ease of use in mind, the Commercial Vehicle ABS EBS Sensor Testertakes minutes to set-up, and, once connected, undertakes a complete test cycle of the six most common causes of EBS / ABS faults, at the touch of a button, in just 15 seconds – a fraction of the time it would take to perform the same tests manually.
Contact aide automotive to purchase this cost effective easy to use tester or buy online at our aide Online PayPal Shop.
Commercial Vehicle ABS EBS Tester

Truck ABS Faults Easily Found With Sensor Tester

Electronic Brake System (EBS) Trailer Testing With ISOCheck

October 11th, 2017 Comments off

What Is The ISO EBS Truck & Trailer Lead

How does the EBS truck & trailer Susie lead work?
Everyone seems to have there own ideas how it works, ranging from; “if it’s not plugged in your trailer brakes wont work”, & “it’s only a back up power anyway”
Both are incorrect!
The truth is…
The Electronic Braking System (EBS) Susie or the ISO 7638 (its correct name) is essential for the trailers Electronic Braking System (EBS) to operate correctly.
So, if a truck has an ISO7638 socket a tractor and trailer must be connected with an ISO7638 Susie and the EBS must be working correctly!
Also this means the EBS warning light the truck operator should be checking is in the cab and not the one on the trailer headboard (if there is one).
This is where the problems start, how does the EBS lead actually work, well this is how:
Pin 1 in most trucks is permanent live
Pin 2 is switched ignition live
Pin 3 is common return to battery negative
Pin 4 is common return to battery negative
Pin 5 is the warning light control (positive)
Pin 6 is “CAN” High
pIn 7 is “CAN” Low
Pin 5 which is the warning light control wire, this pin seems to be continually misunderstood. Some people think pin 5 is controlled by the trucks EBS system or even by the truck itself, both of these are incorrect, how it works is quite simple, a basic explanation is detailed below:
Power from the truck battery routes to a fuse, then to the ignition switch and then to the warning light in the dash board, finally then to pin 5 in the socket.
When an EBS Susie ISO7638 lead is connected to the trailer the trailer EBS system sees 24 volts down pin 5, which and then reduces that voltage inside the trailer ECU to below 5 volts (earth) which then activates the EBS light on in the truck cab.
Once a truck & trailer is in motion and the the trailer EBS system is happy with the wheel speed signals, the ecu then raises the voltage back up to 24 volts and the warning light in the cab goes out, if a fault appears when a truck & trailer is on the road, the ecu lowers the voltage again activating the In Cab Warning Light.(Please Note This Is a Basic Description).
An easy way to test the truck & trailer ISO Connection socket is the ISOCheck
The Electronic Braking System (EBS) Susie or the ISO 7638

What Is The ISO EBS Truck & Trailer Lead?

aide automotive offer a range of products to help with DVSA Guide Roadworthiness

August 17th, 2017 Comments off

CV Traffic Commissioners Review & Advice

Read Some Highlights OF TC’s Annual Report for 2015-16

Recently reported in the Transport Operator, the seven traffic commissioners (TCs) of Great Britain have released their annual report for 2015-16, highlighting a broad range of transport compliance and enforcement issues identified during the course of the year, and their priorities for future progress.

The commissioners, who preside over the eight regional traffic areas, identified key concerns with regard to operator compliance, driving and maintenance standards, as well as problem areas for the authorities themselves to tackle in order to improve the services they offer.

TC Richard Turfitt, who oversees the largest traffic area, in the east of England, said he made little apology for “sounding like a broken record” when it came to vehicle inspections.

“As DVSA estimates that half of MoT fails could be avoided by checking that light-bulbs work, the condition and pressures of tyres and that mirrors, wipers and washers work, there is further work to do,” he said.

“I am appalled by the number of operators who have not even checked whether their inspection sheets are up to date by reference to DVSA’s Guide to Maintaining Roadworthiness.

“In the space of two weeks, two unconnected operators appeared before me suggesting their vehicles were being inspected against safety standards from 1972.”

aide automotive market a range of Brake Testing, Servicing & Diagnostic Tools for commercial vehicle workshops.
With the Bowmonk BrakeCheck Portable Decelerometer Printer kit, a workshop can meet the 3 additional required brake tests with minimum fuss
For Trailer Servicing & Diagnostics, aide offer a complete Trailer Electrical (ABS Light & EBS CAN Line Test), Light and Air Brake Tester with Diagnostics interface for Trailer ECU Code Reading / Clearing and management data viewing.
EBS/ABS Sensor Master testing can be conducted with the Sensor Master, while Battery Diagnostics Tests with a Midtronics MDX Battery Tester.
aide automotive offer a range of products to help with DVSA Guide Roadworthiness. Contact us via our website www.aideautomotive.com
Brake Tester, Diagnostics, Battery Testers

aide auto Market Truck & Trailer Workshop Test Tools

Bowmonk BrakeCheck User Manual Guides Available To Download

June 27th, 2017 Comments off

Bowmonk BrakeCheck User Manual  / Guide

BrakeCheck User Guides Available To Download

The Bowmonk BrakeCheck has been an impressive simple to use brake meter for many fleet operators around the world.

Even so the help of a quick user guide is always required and offer confidence the brake tester is being used correctly.
All customer can now download the main quick reference guide from our PDF download centre, To do so, go the the BrakeCheck page and towards the bottom of the page, Click on the “Download Product Data Sheet” Button.
This will then direct the user into the PDF download page where the BrakeCheck user guide can be downloaded, the BrakeCheck Print Out Explanation Guide can also be downloaded.
The Quick Reference User Guide we offer is all you should need, but if a user has any uncertainty then please call the mobile number detailed on the side of your BrakeCheck for vocal training or support.
Contact aide automotive for Bowmonk BrakeCheck Sales & Support – 0115 8456471
Decelerometer For HGV's

BrakeCheck Conducts DVSA HGV Brake Tests

Brake Testing, Servicing & Diagnostic Tools for Commercial Vehicle Workshops

May 24th, 2017 Comments off

Brake & Diagnostic Products from aide automotive

 

Truck & Bus Product Focus Feature Brake Servicing & Diagnostics had a wealth of product information recently.

aide automotive advertised a range of Brake Testing, Servicing & Diagnostic Tools for commercial vehicle workshops.
With the Bowmonk BrakeCheck Portable Decelerometer Printer kit, a workshop can meet the 3 additional required brake tests with minimum fuss
For Trailer Servicing & Diagnostics, aide offer a complete Trailer Electrical (ABS Light & EBS CAN Line Test), Light and Air Brake Tester with Diagnostics interface for Trailer ECU Code Reading / Clearing and management data viewing.
EBS/ABS Sensor Master testing can be conducted with the Sensor Master, while Battery Diagnostics Tests with a Midtronics MDX Battery Tester.
Contact aide automotive for any questions via email – info@aideautomotive.comor phone 0115 8456471
Bowmonk BrakeCheck

Brake Testing, Servicing & Diagnostic Tools for Commercial Vehicle Workshops

HGV Brake Testing Essential

April 13th, 2017 Comments off

Truck, Bus & Coach Brake Testing

Following The Bath Tipper Incident Inquiry HGV Brake Testing Essential

Following the Bath Tipper Incident inquiry one would make a educated judgement to make sure all brakes and testing of brakes on HGV or Commercial vehicles are examined, maintained and tested with the appropriate recorded paper work.
The inquiry showed the Bath tipper truck to have been poorly maintained which resulted when tested to have a very poor brake efficiency.
aide automotive recommend the use of roller brake testers and decelerometers within a 12 month maintenance and testing policy.
Regular testing on RBT’s and then an in-between decelerometer test like BrakeCheck will offer printed brake reports for service or inspection sheets to complete a maintenance policy for any heavy vehicle operator.
You can dear more of he DVSA’s Heavy vehicle brake test: best practice online.
In the near future aide automotive will be offering On Site Roller Brake Testing, we will visit, test and report on truck, Bus, Coach or Trailer brakes using a calibrated RBT with print out facility.
Contact aide automotive to discuss the use of decelerometers or Roller Brake Testers – 0115 8456471
Decelerometer For HGV's

BrakeCheck Conducts DVSA HGV Brake Tests

Truck & Trailer Brake Testing With An Infra Red Gun

March 22nd, 2017 Comments off

For Christmas 2016 aide automotive are offering a GIVE AWAY deal!

We have 4 Infra Red Temperature Guns to Give Away via a simple question.
Firstly though; Why An Infra Red Temp Gun??
Infra Red Temperature guns are a excellent Brake Tester for checking individual wheel disks or drums to determine brake activation.
We have heard that the DVSA often recommend the use of Infra Red Temperature Guns and see them as good practice in any Commercial Vehicle Fleet or Truck Workshop.
With the ease of just pointing the Infra Red Light at the wheel hub from the outer edge of a trailer or truck and without removing wheels, an infra Red Temp Gun can indicate if a wheel is not braking efficiently as compared to the other wheels on the vehicle.
We have reports of one Truck Driver stating “Been stopped about 10 times in my driving career over 30 years, the last time, he pointed a thermometer at my wheel hubs & explained to me that one was running cool, meaning that is wasn’t doing its job, I was amazed by the technology, didn’t realise that you could get a temperature reading with a laser/infrared light without even touching the hub. Got the workshop to adjust the brakes when I got back to the yard”
So if you want an early Christmas pressie, email us on matt@aideautomotive.com with the answer to this question.
The DVSA Now recommend 4 Commercial Vehicle Brake tests per year using an RBT or decelerometer; whats does RBT stand for?
DVSA Method Of Road Side Truck Brake Check

Use An Infra Red Temp Gun For Brake Testing

BrakeCheck is the number one brake tester for commercial vehicle inspections sheets

February 22nd, 2017 Comments off

Decelerometer BrakeCheck Offers Great Reliability

BrakeCheck Decelerometer Includes 2 Years Warranty

aide automotive have improved our customer service by increasing the warranty from 1 to 2 years on the BrakeCheck decelerometer!

BrakeCheck is the number one brake tester for commercial vehicle inspections sheets and with over 18,000 testers sold BrakeCheck is surely the number one reliable tester on the market.

aide auto’s Matthew Burke Says “Since the launch of BrakeCheck in 2001 we have been continually looking at way to improve the tester for reliability and operational, with BrakeCheck Series 2 we now have the over whelming confidence to offer a two year warranty, operationally the BrakeCheck product is at the very top of its product sector and now we feel its top for reliability.”

BrakeCheck is a portable battery-powered device that can be used by vehicle workshops, government traffic authorities, testing and inspection stations to test and report on vehicle brake efficiency. BrakeCheck is DVSA accepted for commercial vehicles & is MOT approved for all vehicle classes.

aide automotive can supply pricing quotes and full immediate technical support to all!

 

Decelerometer For HGV's

BrakeCheck Conducts DVSA HGV Brake Tests