Archive

Posts Tagged ‘EBS Tester’

EBS/ABS Sensor Tester

November 4th, 2011 Comments off

Europart of Denmark have now been appointed distributors for Denamrk of the EBS/ABS Sensor Tester.

Using the Sensor Tester to check a sensor, the gap and exciter ring Royal Mail found they were able to easily and cost effectively repair warning lights faults on trucks and trailers without the need for expensive diagnostics tools or dealer trips.

All workshops requires fast, accurate and effective tools to diagnose faults easily and quickly. A high percentage of brake EBS/ABS faults are around the sensor or the sensor itself.

Europart have ordered over 100 testers since September with an excellet response from customers.

To review the ABS Tester, click on Sensor Tester ABS.

aide automotive sell and marekt the EBS/ABS Sensor Tester in the UK.

Truck Trailer ABS Sensor Tester

Sensor Tester for ABS or EBS

ABS Sensor Tester

August 12th, 2011 Comments off

Using the Sensor Tester to check a sensor, the gap and exciter ring  a truck or trailer fitter will easily and cost effectively repair warning lights faults on trucks and trailers without the need for expensive diagnostics tools or dealer trips.

The ABS Sensor Master is an easy to use device which will confirm each EBS/ABS sensor is operational and effective. By connecting to the sensor socket on each wheel, individual sensor faults can easily be identified. The Master also tests the exciter ring and the distance between the ring and sensor.

Many workshops use a multimeter to tests sensors but with this only a third of the problem is tested, the Sensor Tester will also test the gap and indicate if the Exciter Ring is damaged or mis aligned, a multimeter cannot do that!

Contact aide automotive to purchase a EBS/ABS Sensor Tester for a Truck Or Trailer Workshop.

Truck Trailer ABS Sensor Tester

Truck Trailer ABS Sensor Tester

Trailer ABS Tester Truck

April 4th, 2011 Comments off

ABS Tester Acquires Royalty

Following a trial purchase Royal Mail have since purchased 29 EBS/ABS Sensor Testers for use within each workshop.

Using the Sensor Tester to check a sensor, the gap and exciter ring Royal Mail found they were able to easily and cost effectively repair warning lights faults on trucks and trailers without the need for expensive diagnostics tools or dealer trips.

All workshops requires fast, accurate and effective tools to diagnose faults easily and quickly. A high percentage of brake EBS/ABS faults are around the sensor or the sensor itself.

Contact aide automotive ltd for further information on ABS Testing for Truck & Trailer.

ISOCheck ABS Tester

November 30th, 2010 Comments off

ABS Warning lights, what do they mean?

This may be a common question from drivers but do we all really know the answer?

Well lets make it simple! There are only three main light sequences that you really need to be concerned with, they are;

1. ON/OFF – At standstill

2. ON – Until the vehicle is driven above 7 kph then OFF

3. ON/OFF/ON – Until the vehicle is driven above 7 kph

With the introduction of programmable warning lights in EBS systems it has become a bit harder to know what a drivers dashboard should be doing but with a couple of simple tests the answer is there. If the truck and trailer are both ABS sockets, start by just connecting the trailer and turn on the ignition, the trailer warning light in the cab should come on, if the light goes ON/OFF then this is the sequence, if the light goes ON/OFF/ON, then this is the sequence, if the light is ON and stays on then drive the truck and trailer above 7kph, if the light goes OFF then this is your sequence. However please note if the light stays ON after a test drive then there is a fault in the system which requires maintenance before the truck and trailer can be utilised.

So how can we decide if the fault lies with a truck or trailer?

Also to make matters worse newer trucks now have an LCD or electronic dashboard, so we need to establish which light is actually for the trailer. With each manufacturer having individual lights it can be quite confusing.

So this is where the ISOCheck can be used, the ISOCheck is not only used to test the power from the truck but can be used to show you the warning light function of your trailer.

 First plug the ISOCheck Indicator into the trucks ABS Socket, turn on the ignition, this will test all power form the truck, and if all is OK the ISOCheck will light up GREEN, if there is a fault RED. Once the truck is proven to be OK, turn the ISOCheck around and connect the ISOCheck Indicator into the trailers ASB Socket and the normal end into the truck, ignition on and the warning light in the cab should come on and the ISOCheck Indicator will turn RED as the warning light is ON. If the warning light in the cab then goes out, then the ISOCheck will turn to GREEN. If this happens it not only proves again that the truck power is OK but also it proves the trailers ABS is working.

 The next step is to test drive the trailer above 7 kph, if the warning light comes on while starting to move then the ISOCheck will turn RED. Stop the truck and trailer and remove the ISOCheck indicator from the ABS Socket on the trailer, if the ISOCheck stays RED then the fault is on the truck, if it turns GREEN then the fault is on the trailer. The ISOCheck is as simple as that! Ideal for workshop fitters and drivers the ISOCheck pinpoints faults with the truck or trailer even when mismatching old trucks with new trailers and vice a versa, saving time and money by directing the repairer to the correct area.

Read more by clicking ISOCheck

aide automotive offer a range of workshop products, click on aide automotive for our website.

Sensor Master ABS Tester Ideal for Workshops

July 2nd, 2010 Comments off

The EBS/ABS Sensor Master is the ideal workshop tool for detecting and clearing EBS or ABS Faults.

Since the start of 2010 aide automotive have seen a major increase in sales, Matthew Burke Stated “This product is simple and cost effective, sometimes you just need to easier tools than the more expensive techincal diagnostic tools. I beleive the increase in sales is down to the products word of mouth and customers looking for more cost effective ways to solve brake faults.”

 

The ABS Sensor Master is an easy to use device which will confirm each EBS/ABS sensor is operational and effective. By connecting to the sensor socket on each wheel, individual sensor faults can easily be identified. The Master also tests the exciter ring and the distance between the ring and sensor.

Contact aide automotive ltd for further information.

 

Sensor Master EBS ABS

Sensor Master EBS ABS

EBS/ABS Sensor Tester Offer for March 09

April 1st, 2009 No comments
Tests ABS sensors on trucks & trailers

Tests ABS sensors on trucks & trailers

Vehicle Diagnostics are an essential tool in the running of an efficient business. Any workshop requires fast, accurate and effective tools to diagnose faults easily and quickly. A high percentage of brake EBS/ABS faults are around the sensor or the sensor itself.

The EBS/ABS Sensor Master clears 90% of EBS/ABS faults by testing three points of the system, the tester will work on Wabco, Knorr Bremse and Haldex systems. It’s easy to use for any technician wether that be the new apprentice or a time served fitter. Most importantly it saves workshops time and money by diagnosing the route of the problem rather than having to pay for outside diagnostic work.

aide automotive is running a special promotion on the EBS/ABS Sensor Tester for March 09 only!
£205.00 each on any quantity,

 a saving of £40!

Terms and Conditions
Valid until 31 March 2009 for any quantity
VAT not included